Archive

Published: Građevinar 72 (2020) 8
Paper type: Preliminary report
Download article (Croatian): PDF
Download article (English): n/a
View count: 0

Design of movable frame structures using modified Cross procedure

Alen Stupar

Abstract

An original procedure for static design of movable in-plane frame structures is presented in the paper. The presented design procedure was derived using the modified traditional Cross procedure (TCP). The introduction of the TCP modification has resulted in significant improvement of the design algorithm of movable frame structures as compared to TCP, especially as to elimination of the need to conduct greater number of individual iteration procedures, and to solve linear algebraic equation systems.

Keywords
numerical analysis, relaxation procedure, Cross procedure, division coefficient, transfer coefficient, in-plane frame structure

HOW TO CITE THIS ARTICLE:

Stupar, A. .: Design of movable frame structures using modified Cross procedure, GRAĐEVINAR, 72 (2020) 8, pp. 655-671, doi: https://doi.org/10.14256/JCE.1881.2016

OR:

Stupar, A. . (2020). Design of movable frame structures using modified Cross procedure, GRAĐEVINAR, 72 (8), 655-671, doi: https://doi.org/10.14256/JCE.1881.2016

LICENCE:

Creative Commons License
This paper is licensed under a Creative Commons Attribution 4.0 International License.
Authors:
Fotografija
Alen Stupar
Device Solution Laboratory (DSLab) – Tecnisches Buro Munchen