Archive

Published: Građevinar 71 (2019) 7
Paper type: Scientific research paper
Download article (Croatian): PDF
Download article (English): PDF

Rheological characteristics of bitumens prepared with process oil

Julide Oner

Abstract

Depletion of natural and finite resources has necessitated the worldwide reuse of waste and residue materials from industrial production. Not only does the utilization of crude oil residue with bitumen allow supply of additives at a very low cost, but it also permits the use of waste and residue materials as rejuvenator in nature. The objective of the study is to evaluate conventional and rheological characteristics of original bitumen samples obtained from two different refineries involving different contents (1 %, 2 % and 3 %) of process oil (PO). The results show that PO can be used as an effective and environmentally friendly solution instead of commercially available expensive additives that are used in modification process.

Keywords
crude oil residue, rejuvenator, process oil, rheological characterization, Superpave performance, rutting parameter

HOW TO CITE THIS ARTICLE:

Oner, J.: Rheological characteristics of bitumens prepared with process oil, GRAĐEVINAR, 71 (2019) 7, pp. 559-569, doi: https://doi.org/10.14256/JCE.2587.2018

OR:

Oner, J. (2019). Rheological characteristics of bitumens prepared with process oil, GRAĐEVINAR, 71 (7), 559-569, doi: https://doi.org/10.14256/JCE.2587.2018

LICENCE:

Creative Commons License
This paper is licensed under a Creative Commons Attribution 4.0 International License.
Authors:
Photo20
Julide Oner
Usak University
Engineering Faculty
Department of Civil Engineering