Archive

UDK: 624.012.45.001.7:624.072.3
DOI: n/a

Published: Građevinar 60 (2008) 2
Paper type: Preliminary report
Download article (Croatian): PDF
Download article (English): n/a

Optimisation of fibre reinforced concrete for bending load

Marijan Skazlić, Damir Tkalčić, Dejan Šomoši

Abstract

The paper starts with assertion that the fibre reinforced concrete most frequently contains 30 kg/cu.m. of steel fibres. An optimum fibre reinforced concrete composition, with the mentioned quantity of steel fibres, was selected and, after hardening, the FRC resistance to bending load was tested. In addition to testing influence of hybrid steel fibres on fibre reinforced concrete properties, the influence of fibre orientation was also analyzed.

Keywords
optimisation, steel fibres, bending load, orientation of fibres, toughness, ibre reinforced concrete

HOW TO CITE THIS ARTICLE:

Skazlić, M., Tkalčić, D., Šomoši, D.: Optimisation of fibre reinforced concrete for bending load, GRAĐEVINAR, 60 (2008) 2

OR:

Skazlić, M., Tkalčić, D., Šomoši, D. (2008). Optimisation of fibre reinforced concrete for bending load, GRAĐEVINAR, 60 (2)
Authors:
Skazlic Marijan
Marijan Skazlić
University of Zagreb,
Faculty of Civil Engineering

Damir Tkalčić
Institut IGH d.d.

Dejan Šomoši
Mapei Croatia