Archive

UDK: 624.072.4.001.4:69.009.182
DOI: n/a

Published: Građevinar 63 (2011) 11
Paper type: Original scientific paper
Download article (Croatian): PDF
Download article (English): n/a

Load transfer to laterally supported thin-walled Z-section beams

Diana Šimić

Abstract

The behaviour of thin-walled Z-section beams, laterally restrained along the flange by trapezoidal steel sheeting, is analyzed for the gravity load and uplift load. The gravity load transfer alternative defined in Eurocode 3 (EN 1993-1-3), and the alternative based on beam flange deformation analysis, are considered for the gravity load. The gravity and uplift load transfer alternatives enabling the best possible load situation in beams are also considered.

Keywords
trapezoidal steel sheeting, gravity load, uplift load, thin-walled beam, Eurocode 3, Z section, lateral restraint

HOW TO CITE THIS ARTICLE:

Šimić, D.: Load transfer to laterally supported thin-walled Z-section beams, GRAĐEVINAR, 63 (2011) 11

OR:

Šimić, D. (2011). Load transfer to laterally supported thin-walled Z-section beams, GRAĐEVINAR, 63 (11)
Authors:

Diana Šimić
University of Zagreb,
Faculty of Civil Engineering