Archive

UDK: 624.013.2:624.012.2
DOI: n/a

Published: Građevinar 60 (2008) 4
Paper type: Preliminary report
Download article (Croatian): PDF
Download article (English): n/a

Modelling steel frames with masonry fill

Damir Markulak, Vladimir Sigmund, Ivan Radić

Abstract

Problems encountered in numerical modelling of masonry-filled steel frames subjected to earthquake action are presented. According to new European standards (EN 1998-1) an interactive action should be calculated for such composite systems, but calculation rules are not provided. A practical example is used to show most frequent possibilities for modelling behaviour of such structures based on the finiteelement method, and the need to use a practical approach to find solution to this problem is emphasized.

Keywords
masonry fill, composite system, numerical modelling, earthquake action, finite-element method, steel frame

HOW TO CITE THIS ARTICLE:

Markulak, D., Sigmund, V., Radić, I.: Modelling steel frames with masonry fill, GRAĐEVINAR, 60 (2008) 4

OR:

Markulak, D., Sigmund, V., Radić, I. (2008). Modelling steel frames with masonry fill, GRAĐEVINAR, 60 (4)
Authors:
Damir Markulak WEB
Damir Markulak
Josip Juraj Strossmayer University of Osijek
Faculty of Civil Engineering and Architecture Osijek
Vladimir Sigmund WEB
Vladimir Sigmund
University of J. J. Strossmayera in Osijek
Faculty of Civil Engineering

Ivan Radić
University of J. J. Strossmayera in Osijek,
Faculty of Civil Engineering