Archive

Published: Građevinar 66 (2014) 4
Paper type: Preliminary report
Download article (Croatian): PDF
Download article (English): PDF

Bond behavior of the reinforcement bar in glass fiber-reinforced polymer connector

Kiarash Koushfar, Ahmad Baharuddin Abd. Rahman, Yusof Ahmad

Abstract

This paper presents the bond stress – slip behavior of a newly developed grouted splice connection fabricated by glass fiber-reinforced polymer (GFRP). A total of twenty seven specimens were tested under increasing axial tension load. Results from the test specimens were adapted to model a bond stress – slip law to be compared with the requirements provided by design codes and provisions. The results show that by reducing mid-length diameter, higher bond strength and load capacity are generated in the tapered splice sleeves.

Keywords
slip, precast connection, Splice connector, glass fiber-reinforced polymer, bond stress

HOW TO CITE THIS ARTICLE:

Koushfar, K. ., Rahman, A. B. A., Ahmad, Y.: Bond behavior of the reinforcement bar in glass fiber-reinforced polymer connector, GRAĐEVINAR, 66 (2014) 4, pp. 301-310, doi: https://doi.org/10.14256/JCE.913.2013

OR:

Koushfar, K. ., Rahman, A. B. A., Ahmad, Y. (2014). Bond behavior of the reinforcement bar in glass fiber-reinforced polymer connector, GRAĐEVINAR, 66 (4), 301-310, doi: https://doi.org/10.14256/JCE.913.2013

LICENCE:

Creative Commons License
This paper is licensed under a Creative Commons Attribution 4.0 International License.
Authors:
913 Autor 1 WEB
Kiarash Koushfar
Universiti Teknologi Malaysia
Faculty of Civil Engineering
913 Autor 2 WEB
Ahmad Baharuddin Abd. Rahman
Universiti Teknologi Malaysia
Faculty of Civil Engineering
913 Autor 3 WEB
Yusof Ahmad
Universiti Teknologi Malaysia
Faculty of Civil Engineering